Hi, We are capturing DDR3L signals for DVT ( Detailed Validation). Tek Scope can't able to understand Read bursts. DQ is starting from GND level increases close to Vref then changes Level HIGH or LOW. My understanding is DQ should be near to Vref when not driven. Why it is starting from GND level (Not only at the start but between bursts also) Snapshot with DQS is uploaded here. http://postimg.org/image/4c0ufvrcp/ http://s28.postimg.org/ux3dbftq5/data_blue_dqs_yellow.jpg ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu