[SI-LIST] Re: Translation failed due to DMLCHECK errors
- From: "Lynne D. Green" <lgreen22@xxxxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 19 Apr 2012 12:30:38 -0700
Hello, Bingfeng,
This is an old issue. The problem was, model
generators would make multiple transitions in a
single run, then extract multiple waveforms
without correcting the start time of each waveform.
One common "fix" was to subtract the initial Time
from the Time column, to make each column start at
Time=0. Example: T=100n, 101n, 102n, etc. becomes
Time=0, 1n, 2n, etc.
You might wish to update your Cadence tools.
Cheers,
Lynne Green
"IBIS training when you need it, where you need it."
Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
425-788-0412
lgreen22@xxxxxxxxxxxxxx
On 4/19/2012 8:57 AM, 冰峰 wrote:
>
> Some words are missed
>
> Hi All,
> I try to translate bcm63281t_iolrc.ibs model to bcm63281t_iolrc.dml for
> Sigxplore，Translation failed due to DMLCHECK errors.24 errors in all.
>
> ERROR: TVCurve start time of BCM63281T_IOLRC_B65LPP60_ST152Q RisingWaveform
> rise_1 at line 15669 is not same as BCM63281T_IOLRC_B65LPP60_ST152Q
> FallingWaveform fall_1 at line 13216
>
> ERROR @line 16139: TVCurve must start at time zero
> ERROR: TVCurve start time of BCM63281T_IOLRC_B65LPP60_ST152Q RisingWaveform
> rise_3 at line 16621 is not same as BCM63281T_IOLRC_B65LPP60_ST152Q
> FallingWaveform fall_3 at line 14198
>
> ERROR: TVCurve start time of BCM63281T_IOLRC_B65LPP60_ST152Q RisingWaveform
> rise_4 at line 17110 is not same as BCM63281T_IOLRC_B65LPP60_ST152Q
> FallingWaveform fall_4 at line 14691
>
> I want kown how to check the model，and if the model is ok，how can I get a
> .dml model.
>
>
> Regards
> bingfeng
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
