Hello SI experts, I am a babyuser of Blast and when i started that i found the Setup Advisor is not invoked properly and giving errors.So i bypassed the SA and run the STM files available in the examples. But for starting a new project in Blast, i have some questions. 1. Since SA is not working properly,is there any way to generate STM file?Is there any utility or tool or script available? 2. How to generate *.lib files.Is there any utility or script available? 3. In some of the things i have seen, the padsx utility accepts the *.asc file exported from powerpcb and gives error if we supply the *.asc generated directly from the ViewDraw schematics.What type of asc file input is needed for padsx utility? I went through the reference document available in the Blast tool installed directory. But i couldn't get any clue. So i need your valuable suggestions. Any suggestion would be greatly appreciated. thanks and advance, Siva __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu