[SI-LIST] Thickness of glue used on outer layers of PCB
- From: "Grasso, Charles" <Charles.Grasso@xxxxxxxxxxxx>
- To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
- Date: Wed, 28 May 2014 14:52:08 +0000
Hello all,
When using thin (i.e ~3.5mils) dielectrics for the outer layers of (say) a 4
layer board - how thick
(typically) is the glue layer that binds the outer layer?
I am interested whether there might be a significant change in the effective
Er that will affect
impedance calculations.
Thanks!
Best Regards
Charles Grasso
Compliance Engineer
Echostar Communications
(w) 303-706-5467
(c) 303-204-2974
(t) 3032042974@xxxxxxxxx
(e) charles.grasso@xxxxxxxxxxxx
(e2) chasgrasso@xxxxxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
