Hi All, I just added new information to my Technical Tidbit article on filtered contact discharge waverforms. I changed the wording to specifically address applying the IEC ESD waveform to devices, narrowing the focus somewhat, which was my original intent but it was not obvious. I also included a link to David Pommerenke's 1993 paper from his recent posting. The link is: http://emcesd.com/tt2006/tt090106.htm I think the added words should help clear up issue. Doug -- ------------------------------------------------------- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: doug@xxxxxxxxxx \ _ / ] \ _ / Website: http://www.dsmith.org ------------------------------------------------------- ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu