[SI-LIST] Re: Testing chips with system level specs
- From: "Conway, Patrick R (Houston)" <p.conway@xxxxxx>
- To: "David Cuthbert" <dcuthbert@xxxxxxxxxx>, <doug@xxxxxxxxxx>
- Date: Wed, 6 Sep 2006 13:48:15 -0500
David-
In your message you write:
<q> ...obtained while holding a tool in my hand.=20
I used myself for these discharges up to 8 kV - a=20
rather unpleasant ESD voltage. I was standing on a=20
metal mat, if I remember correctly.=20
As all of this was done at another employer, ...
<q>
Congratulations on leaving that position.
Hope you found a new employer that uses test=20
equipment, instead of the employees, for=20
high-voltage testing.
:)
Best Regards,
Patrick.
p.conway@xxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
