You can obtain a copy of the specification: JESD79-2C from JEDEC. Address and control must be terminated, 50 Ohms to Vtt = Vref +/-40mV. Steve On 5/26/2011 7:09 AM, sudarshan kr wrote: > Hi All, > We are designing a board with an ASIC and the DDR2(1066) device. We have a > 32 bit interface where in we are using 2 x16 devices. > Since the Address bus is shared from the ASIC to the DDR2 device, > 1. Is it mandaotory to use the external termination on the Address lines. > 2. If yes, what is the value to be choosea and what kind of termination to > be provided > > Thnaks in advance > > Regards, > Sudarshan > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu