Hi Kevin: If the two branches are matched length and impedance--as they are here--it makes the most sense to terminate as close to the driver as you can ... before the branch. This gives you two benefits: one less component, and the series resistor will be closer to the driver. Best Regards, Bill Hargin Direct: 425-702-0744 Fax: 425-702-0305 Cognition Consulting Electronic Design Software and Consulting http://www.CognitionConsulting.com > -----Original Message----- > From: si-list-bounce@xxxxxxxxxxxxx > [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of kevinlfitzgerald > Sent: Friday, April 12, 2002 8:12 AM > To: si-list@xxxxxxxxxxxxx > Subject: [SI-LIST] Terminating a branched clock line > > > > Hi, > > I have a clock signal with a 1ns rise time which is distributed to 2 > parts. The 50 Ohm lines are matched length within +/-50 thou after > the branch. Our concern lies with the source termination. Should the > source termination be before the branch, or immediately after the > branch ? > > Any thoughts, > > Thanks, > > Kevin > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu