Hi Feng, 20 Ghz is the bandwidth, 100ps is the rise time of the pulse.No,I didnt see big return loss. --bala On 30 Sep 2013 06:49, "Feng Wu" <wufengthu@xxxxxxxxx> wrote: > > Hi Bala > Would you please clarify what the S parameter bandwidth is? do you see big > return loss? > About the 100ps pulse in TDR measurement, do you refers to square pulse > with 100ps rising time or pulse width 100ps? > Do you enable the peeling off algorithm for both case? > > > B.R. > Feng Wu (å´æ«) > ------------- > Signal Integrity Engineer > Cisco Shanghai > ------------- > > 2013/9/30 bala <balaseven@xxxxxxxxx> > >> Hi Experts, >> I am validating one high speed interface for my new design.I just wanted >> to >> ensure differential impedance of my IC package+PCB interconnect+backplane >> connectors are in 90-110 ohm range. >> My connector vendor shared their s-parameter model and their TDR >> report.Their plot shows 85-102 ohm variation.They just applied 100 ps >> square pulse and generated their TDR plot, whereas in my tool i generated >> TDR directly from S-parameter(no pulse applied,this tool has this >> option),and my plot shows different result(95-103 ohm).I am just checking >> with my vendors on this.My question is,no vendor always share their report >> along with their model.Many of us would have decided their channel's TDR >> is >> good as it shows 95-103.But actually different tool has different method >> to >> generate TDR and shows different plot,like my vendors' report and my >> report.So if someone provide their model without their own correlation >> report,how do we believe our results are correct? >> -- >> bala >> >> >> ------------------------------------------------------------------ >> To unsubscribe from si-list: >> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field >> >> or to administer your membership from a web page, go to: >> //www.freelists.org/webpage/si-list >> >> For help: >> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field >> >> >> List forum is accessible at: >> http://tech.groups.yahoo.com/group/si-list >> >> List archives are viewable at: >> //www.freelists.org/archives/si-list >> >> Old (prior to June 6, 2001) list archives are viewable at: >> http://www.qsl.net/wb6tpu >> >> >> > > > -- > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu