A stronger resistor is one that is less likely to break. Isn't it? Indeed, "stronger" is a really poor description to use for a resistor, unless describing its mechanical strength. However, in the context of pull-up and pull-down resistors, we do sometimes speak of weak pull-ups, so I suppose a strong pull-up could be the opposite. So, in this LIMITED context, one might say that the lower valued resistor would be the 'stronger' one. I would not call it a stronger resistor, but might call it a stronger pull-up or pull-down (resistor). I don't recall seeing "strong" used elsewhere to describe a resistor's value, and I would not recommend using it without clear explanation. Andy ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu