Greetings Experts: I am working on a simple 2-layer PCB design with a single ground and 2 voltage supplies. I was wondering if there would be any negative side effects if I do a ground pour on the bottom and 2 different supply pours on the top. This board has level shifting, so the voltage planes would be on the respective sides of the level shifters. I have concerns that this could act like a dipole antenna. Maximum frequency is 40 MHz. Thanks, Brendan------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu