[SI-LIST] Re: Split power Plane support for Hyperlynx

From: "Angulo, John" <john_angulo@xxxxxxxxxxx>
To: "'sureshk@xxxxxxxxxxxxxx'" <sureshk@xxxxxxxxxxxxxx>,si-list@xxxxxxxxxxxxx
Date: Tue, 30 Sep 2003 16:09:37 -0700
Suresh,

This sounds like an issue for Hyperlynx technical support.  Please send the 
required Board Station-to-HYP translator input files to 
support_hyperlynx@xxxxxxxxxxx  I am forwarding your email there as well to 
explain the issue.

Thanks,

John Angulo
Hyperlynx Products
Mentor Graphics Corp.
john_angulo@xxxxxxxxxx
425-869-2320



-----Original Message-----
From: Suresh.K [mailto:sureshk@xxxxxxxxxxxxxx]
Sent: Tuesday, September 30, 2003 3:02 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Split power Plane support for Hyperlynx 




Hi gurus,

I would like to know ,Hyperlynx supports for Split Power planes from

Mentor's board station......

Board Stackup:

Signal-1             Etch Layer-1                       
Signal-2             Etch Layer-2
Power-1 To Power-7   Etch Layer-3
Signal-3             Etch Layer-4
Signal-4             Etch Layer-5
Power-8 To Power-14  Etch Layer-6
Signal-5             Etch Layer-7
Signal-6             Etch Layer-8
Power-15 To Power-21 Etch Layer-9
Power-22 To Power-24 Etch Layer-10
Power-25 To Power-26 Etch Layer-11
Power-27 To Power-29 Etch Layer-12
Signal-7             Etch Layer-13
Signal-8             Etch Layer-14
Power-30 To Power-32 Etch Layer-15
Signal-9             Etch Layer-16
Signal-10            Etch Layer-17
Power-33 To Power-35 Etch Layer-18
Signal-11            Etch Layer-19
Signal-12            Etch Layer-20
        

Actually in our design, Layers 3,6,9,10,11,12,15,18 are power planes.

Each power plane includes some 7 different power nets and so totally 
35power layers are available in the design..........

When i translate the database to Hyperlynx, the tool treats all the
35 power planes as solid planes and the prepreg and the core material
thickness is added between each power layers,so total board
thickness increased to 255mils,but the actual board thickness is 96 mils.

So any of you know how to modify the Edit--> Stackup
for split planes with one single plane.

Thanks & Regards,
Suresh.K,
C-DOT,
Bangalore-52.



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
[SI-LIST] Re: Split power Plane support for Hyperlynx

Other related posts:
