From POLITECHNICO DI TORINO we site... tool named is Idem... http://www.emc.polito.it/software/IdEM/idem_home.asp Jean Audet Electrical Analysis STG / World Wide Packaging & Test Organic and Ceramic Packages IBM Bromont Tel: 450-534-6317, tie line: 552-6317 E-mail: jaudet@xxxxxxxxxx "Saoer Sinaga" <saoer.sinaga@xxxxxxxxx> Sent by: si-list-bounce@xxxxxxxxxxxxx 2008-06-02 03:53 To si-list@xxxxxxxxxxxxx cc Subject [SI-LIST] S-par to Spice Dear all, As you all might know, the S-parameter produced by HFSS is not always passive, especially when you extrapolate to DC. Is there any tool that can generate a passive spice file (spectre compatible) out of a non-passive S-par? Preferably a freeware that I can use immediately. many thanks, Saoer Sinaga NXP Semiconductors. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu