Samtec has an opening for a Signal Integrity test Engineer at our facility Huizhou, China. Interested people can send their resumes directly to jim.nadolny@xxxxxxxxxxx The job description is as follows: Ideal Signal Integrity Test engineer will have a minimum of 5 years of experience performing test and measurements of passive components (connectors, cables and printed circuit boards) with the following equipment: Vector Network Analyzers Digitizing Oscilloscopes with TDR modules Eye pattern measurements Experience with data analysis using Tektronix IConnect, Agilent Advanced Design System or similar tools are required. Familiarity with network analyzer calibration methods and practices is desired. These measurements span the frequency range from DC-20 GHz to support data transmission rates up to 12 Gb/s. RF lab experience with designing and building test fixtures and fine pitch soldering is desired. Experience with mechanical CAD tools (such as AutoCAD) is desirable. Good math and communication skills are required for technical report writing. 4 months of training in the United States on lab practice awareness and technical report generation is required. Preferred location is in Huizhou China. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu