[SI-LIST] Re: Setup-Hold Equations for Source Synchronous Design
- From: "hreidmarkailen" <hreidmarkailen@xxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Sat, 9 Sep 2006 12:22:15 -0400
John,
Yes, your link is a 1998 version. I have one from May 2002: JESD8-9B. Go
to jedec.org and noodle around to the "free download" area.
Apparently, the 405mV really has to do with the 8.1mA drive spec in Table4
for ClassII. Looks like the bad flow of the document is the result of
editing incompletely: that sentence should cite Table4. The language in
the spec isn't very good wrt flowing along logically or making the best
reading. 8.1mA x 50ohm(Rtt) = .405V. at input. The assumption is that min.
drive is 8.1mA. All results at Vin flow from that and Vtt wc assumptions.
Looks like Rtt is assumed to have tol. = 0%. Also see Note2 in Table 4.
"spla yer krunge" party on
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Hill, John
Sent: Thursday, August 31, 2006 4:08 PM
To: Cclewell@xxxxxxxxxxxxx; nrpatel@xxxxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Setup-Hold Equations for Source Synchronous Design
Hello all,
I am reading page 149 of this book right now and am a bit confused. It
is describing SSTL_2 and declares that Vin must reach 405 mV above Vref.
Can someone tell me how you get the number 405?
BTW, the book identifies Vih(ac) and Vil(ac) at 0.31, but the
specification has 0.35. Is this an old specification?
http://download.micron.com/pdf/misc/sstl_2spec.pdf#search=3D%22sstl_2%22
Best regards,
John
=20
---------------------------------------
The information in this email and attachments hereto may contain legally =
privileged, proprietary or confidential information that is intended for =
a particular recipient. If you are not the intended recipient(s), or the =
employee or agent responsible for delivery of this message to the =
intended recipient(s), you are hereby notified that any disclosure, =
copying, distribution, retention or use of the contents of this e-mail =
information is prohibited and may be unlawful. When addressed to Takata =
customers or vendors, any information contained in this e-mail is =
subject to the terms and conditions in the governing contract, if =
applicable. If you have received this communication in error, please =
immediately notify us by return e-mail, permanently delete any =
electronic copies of this communication and destroy any paper copies.
---------------------------------------
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Clewell, Craig
Sent: Monday, August 14, 2006 3:31 PM
To: 'nrpatel@xxxxxxxxxxx'
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Setup-Hold Equations for Source Synchronous
Design
Try Digital Techniques for High-Speed Design ~ Tom Granberg
ISBN#0-13-142291-X
-----Original Message-----
From: nrpatel@xxxxxxxxxxx [mailto:nrpatel@xxxxxxxxxxx]
Sent: Monday, August 14, 2006 3:14 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Setup-Hold Equations for Source Synchronous Design
Hello all,
Can someone point me out to a good reference that explains the setup and
hold margin calculations for a source synchronous design like DDR?
Did not have much luck googling.
Thanks,
Nikhil=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
|***********************************************************************
***|
This email is intended only for the person or entity to which it is
addressed and may contain confidential, proprietary and/or privileged
material. Any review, distribution, reliance on, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you receive this message in error, please immediately
notify
the sender and delete it and all copies of it from your system. Thank
you.
|***********************************************************************
***|
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
