Hi all, This is with reference to the JEDEC standard No. 8-9B of SSTL_2 interface. On Table4, I could see terms like Vtt (WC) and VTT(min) & VTT(max). For finding the maximum on resistance of driver, it uses Vtt(WC). I want to know, why we can't take VTT(min) as that may be realistic as Vtt is what connected as termination voltage. It specifies, for o/p high drive, Vtt (WC) = Vref(max) - 40mV. Vtt(min) = Vref(min) - 40mV. The same is applicable for o/p low drive also. Could anyone clarify this. Regards, Canes ____________________________________________________________________________________ Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. http://tools.search.yahoo.com/toolbar/features/mail/ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu