Hi all, I'm doing SSO simulation of i/o pad + pin with Tr. Lines configuration. I feel there are 5 cases in the simulation, ---------------------------------------------------------------------------------------- Type Process IOVDD Temp Load (F/T) -------- (Max/Min) ------- ---------------------------------------------------------------------------------------- 1. VDD overshoot 2. VDD Undershoot 3. VSS Overshoot 4. VSS Undershoot 5. Delay What I want is, how can we select corners for each case, which gives worst case values. For example, I thought, if L>C then its underdamped, so ringing is more, but how to see (which corner gives) the max overshoot/undershoot in the ringing. My interests from the findings are 1.Ringing in Supply (VDD overshoot, VSS Undershoot) 2.Noise margin (VDD Undershoot, VSS Overshoot) 3.delay Waiting for replies, Canes ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu