Hi All, I have a very basic query on quarter wave stubs. In a FR4 board, with typical Tx to Rx connection using PCB trace with stub, signal left the Tx but did not make it to the Rx due to quarter-wave stub resonant frequency matching the signal frequency. This is expected. But i am unable to understand where did the signal energy go? I understand that there is cancellation due to quarter wave, but i unable to understand from energy cancellation point of view because Tx has launched the energy, but Rx is not seeing it. Regards Vinod A H ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu