We use Hyperlynx and I doubt that we will be switching to SpectraQuest any time soon. Does Hyperlynx have a similar function or are there any third party software packages that do this? Our layouts are done in Mentor Boardstation, so compatibility with that would be preferred. Thanks, Chris > -----Original Message----- > From: Ray Anderson [mailto:Raymond.Anderson@xxxxxxx] > Sent: Tuesday, August 12, 2003 12:28 PM > To: si-list@xxxxxxxxxxxxx > Subject: [SI-LIST] Re: SI software question > > > Michael Robinson wrote: > > > >4. You have been talking about decoupling caps, but to my knowledge > >SpectraQuest does not address that area. Is that correct? > It appears > >to me that power and ground is assumed to be ideal, and that > there must > >be some other packages to calculate power and ground issues. > > > > Michael- > > Your recent message poses lots of good and relevant > questions. Let me answer > just a single point (your Q #4) at the moment. > > > Specctraquest contains an optional module called the "Power > Integrity" module (or something similar) that addresses the > problem of analyzing decoupling capacitor placement on a real > plane (represented by orthogonally connected transmission > line segments.) > > The power integrity module in Specctraquest is based on the > power distribution methodology and software created here at > Sun by our SI staff over the past several years. > > Cadence should be able to supply you with the full set of details. > > > > -Ray Anderson > Sun Microsystems Inc. > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu