Please send your resume directly to me. Role: The QCT Product & Test group has an opening for a device load board design position. This group develops test solutions for design verification and high volume production testing of Zero-IF (ZIF) RF receivers/transmitters/transceivers, Mobile Station Modems (MSMs), baseband mixed-signal receivers, audio devices, and power management ASICs designed by QCT. Job responsibilities for this position include design and debug of test interface hardware, schematic capture, oversee layout, and release test hardware into volume production. Skills/Experience: * Understanding of electrical engineering concepts and circuit solving skills * Able to work with common test equipment (oscilloscope, spectrum analyzer, logic analyzer, network analyzer, etc) * DUT/DIB Test board and/or probe card design and development * Knowledge in RF, mixed-signal, or analog PCB design including CAD interface * Familiarity with Mentor Graphic and Cadence a plus * Ability to communicate clearly, organize effectively and document work thoroughly * Experience designing hardware for the following: Teradyne Uflex, Iflex, Verigy 93k * Experience using device handlers and probers; TEL Precio, Accreech UF3000, SUSS PA300 Education Requirements: § BSEE or equivalent § Course work: * Analog circuit design * RF Fundamentals * Analog/Digital Communications Location is in San Diego John Josefosky ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu