[SI-LIST] Re: SATA board to board connector question
- From: olaney@xxxxxxxx
- To: leeritchey@xxxxxxxxxxxxx
- Date: Mon, 27 Aug 2007 16:00:31 -0700
Further down in the message you replied to, you will find Jeff's link:
"> > url to my study on microstrip vs. stripline loss:
> > http://pcdandm.com/cms/content/view/2572/95/
> > "
Regards,
Orin Laney
On Mon, 27 Aug 2007 15:51:32 -0700 "Lee Ritchey"
<leeritchey@xxxxxxxxxxxxx> writes:
> Orin,
>
> I'm not sure what article you are referring to, but if they are the
> two
> columns in Circuitree, the material in question is FR408 not
> Nelco4000-13SI.
>
> I'd be interested to know what the nasty FR-4 is you speak of is.
> I've not
> seen any that is all that bad. I've seen glass weaves that ar
> eterrible,
> but that is independent of the resin system.
>
> We are all interested in making things work for the lowest possible
> cost
> and that means avoiding expensive "microwave" material if possible.
> In
> most cases it turns out it it.
>
> As always, it takes good analysis to decide what good enough is as
> you
> point out.
>
> Lee
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
