Hi Cody/Ron: > >Does anyone in the group know of any available software > packages that > >can take post measurement S11 data and convert it to a time domain=20 > >reflected signal? While it's true that tools with RF roots perform this analysis, we've offered this functionality for years ourselves, and I'm sure there are several others offering this functionality ... 3 Mentor tools that do this: HyperLynx: Pre- and post-layout; Works in any PCB flow. ICX: Primarily for floorplanning and post-layout; Board Station and Expedition. ICX Pro: Pre- and post-layout; Tightly integrated into the Expedition flow. Bill Hargin High-Speed Marketing Manager Mentor Graphics Corp. Systems Design Division 425-301-4425 - Mobile=20 =20 > -----Original Message----- > From: si-list-bounce@xxxxxxxxxxxxx=20 > [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of ron@xxxxxxxxxxx > Sent: Friday, December 21, 2007 3:51 PM > To: codymiller@xxxxxxxxxx > Cc: si-list@xxxxxxxxxxxxx > Subject: [SI-LIST] Re: S parameter to time domain signal >=20 > Hi Cody >=20 > ADS is the only tool that takes complex S-Parameter data as a=20 > model and simulates the time domain signals including reflections. >=20 > Call Agilent.... Lease is about 20K per year fully supported >=20 > Ron Miller >=20 >=20 > codymiller@xxxxxxxxxx wrote: >=20 > >All, > > > >Does anyone in the group know of any available software=20 > packages that=20 > >can take post measurement S11 data and convert it to a time domain=20 > >reflected signal? > > > >Thanks, > >Cody Miller > >------------------------------------------------------------------ > >To unsubscribe from si-list: > >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > >or to administer your membership from a web page, go to: > >//www.freelists.org/webpage/si-list > > > >For help: > >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > >List technical documents are available at: > > http://www.si-list.net > > > >List archives are viewable at: =20 > > //www.freelists.org/archives/si-list > >or at our remote archives: > > http://groups.yahoo.com/group/si-list/messages > >Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > =20 > > > > > > =20 > > >=20 >=20 > -- > Ronald B. Miller, Microwave/SI Engineer RAIL =3D NOISE + REFLECTIONS > Gigahertz Data Div of MI Corp. \\ // \\ //=20 > 7721 Sunset Avenue \\// \\// > Newark, CA 94560 ->JITTER<- EYE ->JITTER<- > tel 510-793-4744, //\\ //\\ > fax 510-742-6686 // \\ // \\ > www.ghzdata.com RAIL =3D NOISE + REFLECTIONS=20 > =20 > =09 > =09 >=20 > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field >=20 > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list >=20 > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field >=20 >=20 > List technical documents are available at: > http://www.si-list.net >=20 > List archives are viewable at: =20 > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > =20 >=20 >=20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu