2W spacing is acceptable at this speed.Think about even and odd mode crosstalk. Regards bala On 1 Feb 2014 11:23, "Thulasi Ramu J" <thulasi.ramu@xxxxxxxxx> wrote: > Hi, > I want to route 105MHz speed synchronous bus signals. > Synchronous Bus contains data and control signals. > Some signals are travelling in one directon and some are in the opposite > direction. > > I am providing 2W spacing between the signals travelling in the same > direction. > Do I need to provide additional spacing for the signals travelling in > opposite direction ? > > Or can i route all the signals by providing 2W spacing ? > > Regards, > Thulasi > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu