There is an Intel app note on this for PCI express bus. Thanks Sen On 12/16/2012 10:06 PM, FreeLists Mailing List Manager wrote: > ---------------------------------------------------------------------- > > Msg: #1 in digest > From: miner_tom Cipollone <tom_cip_11551@xxxxxxxxxxx> > Subject: [SI-LIST] Routing diff pair HDMI signals at 85 Ohms as opposed to 100 > Date: Mon, 17 Dec 2012 00:19:24 +0000 > > I was told recently that in order to help reduce radiated emissions in HDMI > signals, routed from a PCB to an HDMI connector, that it was better to route > the signals at 85 Ohms differential as opposed to 100 Ohms differential. > > > The contention was that with added connector L/C the overall average > impedance normalized closer to 100 Ohms. > > Is there any credence to this? Is there any research material that agrees > with this? > > > (Hi Nazish) > > Thank You > Tom > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu