[SI-LIST] Re: Rise / Fall time
- From: Hithesh <hitheshn@xxxxxxxxx>
- To: zacksilist@xxxxxxxxx
- Date: Mon, 30 Apr 2012 17:28:20 +0530
You can calculate the rise/fall time by the dv/dt (ramp data) in the ibis
model file.
-Hithesh
On Mon, Apr 30, 2012 at 5:19 PM, Zack B <zacksilist@xxxxxxxxx> wrote:
> Hi,
> I'm trying to calculate the critical length of my signals to determine the
> need of terminations. However, for the component I use, I could not find
> any spec for rise / fall time in the data sheet. I, however have IBIS
> models. So, can I simulate the driver / receiver model to obtain the
> minimum rise / fall time values which I can then use to determine my
> critical length?
>
> Regards,
> Zack
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List forum is accessible at:
> http://tech.groups.yahoo.com/group/si-list
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
