be an issue.
you may have to route high speed traces orthogonaly. have SERDES on outer
layer and can have ddr on inner layer.
Regards
bala
On Fri, Sep 11, 2015 at 1:52 PM, Orin Laney <olaney@xxxxxxxxx> wrote:
That's up to how well you implement it! There is nothing wrong with the
technology in and of itself, but the problem areas are typically
transitions
to/from parts and routing near objects that affect the local impedance.
Will
this be an over/under or side by side approach? There are pluses and
minuses
to each.
Orin
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On
Behalf Of Vivek Vishwanath Thyagarajan
Sent: Thursday, September 10, 2015 10:55 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] RegardingDual Stripline PCB routing
Hi
I am planning to design a PCB board using Dual Stipline. The board has
several high speed interfaces like DDR , PCIe ,USB3.0 .
Will there be any product issues if we use Dual Stripline
Thanks & Regards
Vivek.T
L&T Technology Services Ltd
www.LntTechservices.com<http://www.lnttechservices.com/>
This Email may contain confidential or privileged information for the
intended recipient (s). If you are not the intended recipient, please do
not
use or disseminate the information, notify the sender and delete it from
your system.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu