Hello, Instead of assigning IBIS model to whole cyclone IV component, try to assign IO model of your choice to pin of interest in cyclone IV component.This can be done in two ways. WAY 1: 1.Assign default given IBIS model (.dml) to cyclone IV component in cadence PCB SI. 2.Extract the topology of your interest in cadence spectraquest. 3.The cyclone VI pin of your interest would have been extracted, it would be driver/receiver assigned with whatever model defined in IBIS. 4.Now go to model editor and change the buffer model to IO model of your interest. WAY 2: 1.Keep IBIS model of Cyclone VI converted .dml 2.Do not assign any model to Cyclone VI 3.Extract the topology of your interest in cadence spectraquest. 4.The cyclone VI pin of your interest would have been extracted, it would be driver/receiver assigned with cadence default model. 5.Now go to model editor and change the buffer model to IO model of your interest. Shravan Rao On Tue, Jul 3, 2012 at 10:56 AM, SI <si@xxxxxxxxxxxxxxxxxxxxxxx> wrote: > Hi all, > > > I have cyclone IV ibis model (EP4CE30F780 ) but the pin no in cyclone IV > datasheet is not matching with the pin connection in the board. According > to > the board configuration I want to edit the ibis model so that the buffers > models in the ibis matches with that of the board. Suppose ibis pin 2 is > cmos IO but according to board I want to make it ttl3p3_cio_dio which is at > pin no 343 in ibis model. > > > > I tried editing after converting ibis into dml model but many warnings are > coming. Also I tried to rename/reorder Spice pins option (from Alegro model > integrity-> tools -> dml-> reorder/rename Espice pins) but the option is > not > active. Is there any other option for this problem? Any idea/ hints will be > highly appreciated. > > > > Thanks & Regards, > > SI - Team > > Caliber Interconnect Solutions Pvt Ltd > <http://www.caliberinterconnect.com> www.caliberinterconnect.com > > > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Your's *Shravan Rao* ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu