Hi Techies, Will it be a problem if we use a switching power supply for RF devices like High-speed DAC and ADCs? What are the precautions we need to take if we are going to use a switching power supply for some high sped RF devices and how to over come them? Right now we have designed on eboard in which one switching power supply was placed near the DAC. And the switching frequency is 500KHz. Now wehen i observed the RF DAC in spectrum analyzer iam observing a spur at 239KHz of level -60dB. If i remove the inductor in that supply path and given the external power to the DAC then the spur is not seen. So can you suggest me what might be the problem here. And how to over come this problem. Thanks & Regards Srikanth ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu