Hi folks, I think everyone is familiar with importance of reference part continuity and sufficient margin from signal edge (due to manufacturing miss-registration, return path etc.). The layout inspection usually is done visually. Could you advise me on existence of the feature in any CAD or dedicated scripts that checks it? Thank you, Igal Fridman, SIE ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu