Hi SI GURUs I am a new user of SI Tools so please coop up with me I am in a learning process so when I view any waveform for reflections in the tool I am getting sharper edge on the receiver point than on the driver point I am unable to understand this. can any one tell me is it correct or where the problem may be on that net the tracelength is exceeding the calculated one. thanks in advance ------------------------------------------------------- With Regards, Have A Nice Day, Bye, KEDAR P. APTE Member Technical Staff RTSDG, C-DAC Bangalore Off :+91-080- 5341909/1874 - 145 Res :+91-080- 5269939 ------------------------------------------------------- ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu