Hi! My advice would be to talk to Rambus directly on your case because Rambus does not release any models of it I/O and hence an end user does not have any knowledge about how to go about designing the board except rely on them . Bob --- "Dance Wu (netscape.net)" <wudance@xxxxxxxxxxxx> wrote: > > Hi, > > One of my projects requires RDRAM. I understand that > termination is > needed at the end of channel to eliminate/minimize > reflection. My > question is do I still need these termination > resistors if there is only > one RDRAM device ( not the module ) on the channel? > I'm trying to save > power and board space here. Your opinion and > experience are greatly > appreciated. > > Dan > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in > the Subject field > > or to administer your membership from a web page, go > to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the > Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are > viewable at: > http://www.qsl.net/wb6tpu > > __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu