[SI-LIST] R: [SI-LIST]: Trace-2-Trace Coupling Length with Intentional Crosstalk

  • From: "gianguida@xxxxxxxx" <gianguida@xxxxxxxx>
  • To: <ah.vinod@xxxxxxxxx>, SI-LIST <si-list@xxxxxxxxxxxxx>
  • Date: Tue, 10 May 2016 12:04:05 +0200 (CEST)

Hi Vinod,
this is a perfect case where using a em simulation + circuit simulation would 
give you all the answers
you need
Giancarlo




----Messaggio originale----
Da: ah.vinod@xxxxxxxxx
Data: 10-mag-2016 9.20
A: "SI-LIST"<si-list@xxxxxxxxxxxxx>
Ogg: [SI-LIST] [SI-LIST]: Trace-2-Trace Coupling Length with Intentional 
Crosstalk

Hi All,
Had a query on Trace-2-Trace coupling length in case of intentional
coupling/crosstalk due to physical limitations of board.

I am having 2 stripline traces routed from Point A to Point B in multiple
layers. Ideally i would love to keep them far apart so that there is no
coupling. But due to board constraints, i don't have space to keep them
apart.

The two traces are routed with spacing of 2W where there is space and with
1W spacing in many places where W is width of the trace (in my case H &amp; W
are same numbers in stack-up)...

So would like to know what is the allowed coupling length when the
trace-2-trace spacing comes down to 1W. Signals rise time is 250ps with
frequency being 533MHz. Data pattern can be PRBS 7 or 101010.....

Regards
Vinod A H


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  






------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: