25mm.
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Arun Kumar K
Sent: 24 February 2017 13:27
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Propagation delay Vs Speed(edge rate)
Hi All,
Thanks for your input.
Still I am not clear with this point.
For the better understanding.
For the 10inch routed track in FR4 pcb, what will be the maximum allowable
speed?
For 5GHz what will be the maximum allowable track length?
Both are same question.
Rise time and fall time are depends on Driver. If my understanding is correct.
Correct me if I am wrong.
This question is also confusing me. For 0.1ns rise time what will be the
maximum allowable track length?
Arun Kumar K
-----------------------------------------------------------
Arun
They are not related. Rise time relates to the driver electronics that creates
the signal. Propagation delay is related to the dielectric constant of the
media that the signal is traveling through.
Much like in audio, attack time for an instrument is unrelated to the time the
sound propagates through air.
Scott McMorrow, CTO Signal Integrity Group Samtec Office 401-284-1827 |
+1-800-726-8329 www.samtec.com<http://www.samtec.com>
------------------------------------------------------------------------
From: Ramani Tatikola [mailto:rtatikola@xxxxxxxxx]
Sent: Friday, February 24, 2017 6:38 PM
To: Arun Kumar K
<ArunKumar.K@xxxxxxxxxxxxxxxxxxx<mailto:ArunKumar.K@xxxxxxxxxxxxxxxxxxx>>
Subject: Re: [SI-LIST] Propagation delay Vs Speed(edge rate)
Hello Arun,
Tx delay is based on physical length of the line. Edge rate is time domain
parameter.
Delay and edge rate are connected by Frequency and Time relationship and you
can find them in any text book on Electromagnetics.
Regards,
Ramani
From: Arun Kumar K
Sent: Friday, February 24, 2017 11:54 AM
To: si-list@xxxxxxxxxxxxx
Subject: Propagation delay Vs Speed(edge rate)
Hi All.
I am having small doubt about in Transmission Line, between Propagation delay
and Speed(edge rate).
How we can relate the propogation delay and speed(edge rate)?
How to relate the Speed of the singal and propogation length (Transmission line
length) ?
How to relate the above prameter for the analog signals (slow edge rate)?
Arun Kumar
L&T Technology Services Ltd
www.LntTechservices.com<http://www.lnttechservices.com/>
This Email may contain confidential or privileged information for the intended
recipient (s). If you are not the intended recipient, please do not use or
disseminate the information, notify the sender and delete it from your system.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
