It is actually .0003-.0004in Silver Plate QQ-S-365 with .00003in min Rhodium on it.=20 Rhodium 2.11e7 S/m --- 2.3094e7 S/m Silver 6.17e7 S/m Is this the information that I need? M -----Original Message----- From: Fred Balistreri [mailto:fred@xxxxxxxxxxxxx] Sent: Thursday, May 29, 2003 11:04 AM To: Moeller, Merrick Subject: Re: [SI-LIST] Plated Contacts "Moeller, Merrick" wrote: >=20 > What effect does plating a contact have for > simulations? Can current concentrations be predicted well > enough to determine the correct material properties to use > when simulating a Copper contact with silver/rhodium plate? > Basically how do I choose what material Copper or Rhodium Some tools allow you to layer on the plating material and its conductivity. The main differences will of course be in resistance. Since Silver is a better conductor than copper I would not expect any DC resistance problems. However the skin effect could be=20 another matter. The skin depth of silver is well known but I am not familiar with Rhodium. You would have to get the conductivity number of the Silver/Rhodium plating material for a start.=20 Best Regards, >=20 > Thanks, >=20 > Merrick M. Moeller > Design Engineer Electrical > Cinch Connectors INC. > 1700 Finley Rd > Lombard IL, 60148 > Phone: 630-693-2062 > Fax: 630-7056058 > mmoeller@xxxxxxxxx >=20 > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field >=20 > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list >=20 > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field >=20 > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu >=20 --=20 Fred Balistreri fred@xxxxxxxxxxxxx http://www.apsimtech.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu