Dear All In current work, I am studying core power supply. The voltage of core power is very low (0.9V-1.2V) and the power consuming is very high (dozens of Amperes). There is often power integrity problem in the frequency domain from 10MHz to 20MHz. The solution is very easy that discrete caps should be added on the PCB. My problem is that the PI problem is found out until the first edition has been produced. Then the decoupling caps is determined. I want to determine the decoupling caps before the first edition is produced in order to quicken the design flow. Therefore, I should know the current noise source. I have been looking for the paper about how to get the core power consuming in IEEE electrical library. However, I have not found any useful paper. I hope I have express myself clear. Any advice is prefered. Best Regards Zhangkun 2005.5.8 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu