[SI-LIST] PHY PCS
- From: Ravindra Johari <Ravindra.Johari@xxxxxxxxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 2 Feb 2006 14:39:28 +0530
Hi Gurus,
Have a very generic question about Physical Layer Device.
In the PCS i.e the Physical coding sublayer of the PHY Device why is the
8b/10b encoding/decoding required.
Why not the serial signals received by the MDI directly interfaced with the
MAC without encoding/decoding??
Apologies, if this is not related to Signal Integrity...
Thanks and Regards,
Ravi..
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
