[SI-LIST] PCI Express Edge /Slot Dual design cosideration
- From: "raja" <s.raja@xxxxxxxxxxxxx>
- To: "si-list" <si-list@xxxxxxxxxxxxx>
- Date: Wed, 8 Mar 2006 15:23:17 +0530
Hi,
I am designing a board with two PCI express edge connector (one side x4 and
other side x8 Edge). Planning to use an edge to slot converter on the edge
connector to function as a slot . What are the design considerations to be
taken care for the dual design apart from - Voltage, clock and reset -
direction reversal.
Regards
Raja
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] PCI Express Edge /Slot Dual design cosideration
