Joel you can choose the free field solver of your choice to get a geometry for either edge or broadside coupled differential pair. Alternately for $20. you can rent time on Polar and get a pretty precise result. Wider traces have less skin loss, and can be etched more accurately. They take up more space in the X-Y plane, require greater cavity thicknesses, and require more space to hold down crosstalk. The general idea is only go as wide as you need to. Steve. Joel Amzallag wrote: > Hi, > I am looking for rules off thumb on PCB : > - What is a practical geometry for a 100 ohm, differential (coupled) > stripline in an FR-4 circuit board? > - What are the tradeoffs between trace width and dielectric thickness? > > > Thanks, > Joel. > > > --------------------------------- > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now. > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > > -- Steve Weir Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 California office (408) 884-3985 Business (707) 780-1951 Fax Main office (401) 284-1827 Business (401) 284-1840 Fax Oregon office (503) 430-1065 Business (503) 430-1285 Fax http://www.teraspeed.com This e-mail contains proprietary and confidential intellectual property of Teraspeed Consulting Group LLC ------------------------------------------------------------------------------------------------------ Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu