[SI-LIST] Re: PCB extractor to obtain S parameters
- From: <colin_warwick@xxxxxxxxxxx>
- To: <Alexandre.AMEDEO@xxxxxxxxxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Fri, 8 Aug 2008 16:14:16 -0600
Hi Alexandre,
Me again with a second short (3 min.) video. This one shows the step before
running Momentum where you export the critical nets from Allegro and import
them into ADS Layout.
http://tinyurl.com/ads-allegro-dfi
Hope this helps,
-- Colin Warwick
Agilent Technologies, Inc.
http://signal-integrity-tips.com
--
Sent: Thursday, August 07, 2008 5:40 PM
Subject: RE: [SI-LIST] Re: PCB extractor to obtain S parameters
Arrrh! This is maddening! For some reason the SI-List web server doesn't like
URLs with an equal sign in them. Here's the same link as a TinyURL:
http://tinyurl.com/5wjwmo
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Alexandre.AMEDEO@xxxxxxxxxxxxxxxxxx
Sent: Thursday, August 07, 2008 5:24 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] PCB extractor to obtain S parameters
Hi all,
I am looking for all PCB tools who can extract PCB information from Cadence
tools and execute analysis to have S parameters of, for example, a differential
trace.
Thanks and regards,
Thales Land & Joint System - Colombes
Alexandre AMEDEO
Intégrité du Signal
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
