Hi All, I'm facing some issues in the manufactured PCB due to the error in the routing stage. The error is a single net is routed in two different layers. The signal is running from a source pin to the receiver pin in two different layers and each is 50-ohms impedance designed individually. Here my question since the two traces are shorted at receiver and driver pins the effective impedance will come down to zo/2 corrcet me if i'm wrong. Is it possible to achieve 50-ohms in some way in the actual manufactured board? What could be the other problems we can expect for the above scenario for the failing of signals? Thanks Pugal ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu