Hi All, I am measuring 125MHZ,1.2ns rise time clock with Tek's scope. When i measure clock with 5G Bandwidth i see non monotonic edges,when i measure the same clock with 500MHZ and 1GHZ,clock was clean. Here is the formula i use whenever assess clock signals, Fknee=0.5/rise=0.5/1.2ns=416MHZ Required bandwidth for maximum accuracy=1.9*419=800MHZ. Since required bandwidth is 800MHZ ,can i consider waveform with 1G as precise waveform.? Why non-monotonic appears at high BW? -- bala ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu