Hi Tim, PADS PowerPCB should have a direct read interface to Orcad PCB. See: http://www.mentor.com/products/pcb/pads/physical_design/pads_layout/ Regards Dirk --- In si-list@xxxxxxxxxxxxxxx, "TTSP (Timothy Pak)" <ttsp@xxxx> wrote: > All, > Does anyone know is there a translator for translating Orcad PCB layout to > Mentor Graphics PADS 2004? > > > Thanks, > Tim > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxx with 'help' in the Subject field > > List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > > List technical documents are available at: > http://www.si-list.org > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu