Hi all, I want to estimate one p2p net with Hspice, the structure is simple p2p net like as following: IC_buffer_output <--> transmission line <--> IC_buffer_input. After I finished the whole structure, one strange question appears when I running the *.sp file. The error note given is as following: BSIM3 Fatal **error** Effective channel width <= 0. I can't find what is wrong with the file, so I do some test through cutting the path as following 4 steps: (1) cut the connection between buffer_input and transimission line; (2)add one C_loading to the end of transimission line and run the simulation, the result is ok; (3)stimulating the buffer_input directly, it works also rightly. (4)However, as described before, when I connected the whole channel(buffer_output + transimission line + buffer_input), it doesn't work. Appreciate your advice very much! Thanks firstly! Best Regards! Stephen ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu