Adnan, You can use the [Model Selector] IBIS keyword. You can read about it in the IBIS v5.0 spec http://eda.org/pub/ibis/ver5.0/ver5_0.ibs. Let me know if this makes sense, and if you have any specific questions. Regards, -- Abdulrahman Rafiq Signal Integrity / IBIS Modeling Consultant abbey.rafiq@xxxxxxxxxxxxx (805) 708 - 1976 (mobile) http://www.linkedin.com/in/arafiq On Tue, Nov 3, 2009 at 11:26 AM, Yassin, Adnan <adnan.yassin@xxxxxxxxx>wrote: > Hello.. > > How do I model ODT (On Die Termination) in IBIS? I checked the Specs and > couldn't find the info there. I greatly appreciate if someone send me an > example. > > Thanks, > -Adnan > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu