... and be run long enough to capture the majority of the ISI from the combined behavior of the TX output, channel and RX termination network. N'est-ce pas? Todd. -- Todd Westerhoff VP, Software Products SiSoft 6 Clock Tower Place, Suite 250 Maynard, MA 01754 (978) 461-0449 x24 twesterh@xxxxxxxxxx www.sisoft.com -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of steve weir Sent: Tuesday, December 06, 2011 9:32 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: Number of bits to simulate This subject comes up periodically. Your PRBS pattern length should capture the bandwidth limits of the data that will actually traverse the channel. Steve. On 12/6/2011 6:01 AM, Roopesh Badala wrote: > Hello Experts, > We are simulating a LVDS channel of 800Mbps datarate using ibis > models& cadence channel analysis tool utilities. > > We are struck at selecting number of bits for simulation. > > How do you decide on the PRBS pattern length for simulation. > > with 32 bits the eye opening is good. but for higher pattern length > the eye opening is bad. > > Is there any relation between the channel length or data rate to > number of bits to simulate. > > kindly advise. > > Thanks in advance > > Roopesh. > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu