Two layers of metal will short out. Two layers of dielectric provide no signal metal layer. Some tools require both metal and dielectric layers to be defined. To determine the tool requirements, read the manuals/help docs or contact the manufacturer's customer support. Regards, Lynne On 9/3/2012 12:32 AM, Mik Nazaryan wrote: > Hi all, > Engineers who are familiar with HyperLynx please help solve stackup > problem in HyperLynx. I'm getting stackup problems message when trying > to simulate a one single net in my PCB. My PCB board has 2 physically > layer only. But when trying to simulate a got warning message "The > stackup has error". And when I opened stackup to edit there is a another > message there. Nothing to do. No signal found for analyze". Before I had > not such kind problem. > Can anyone tell what does this means and how to solve it? > Thanks. > > Mik. > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu