[SI-LIST] Need stackup editing help in HyperLynx
- From: Mik Nazaryan <mik.nazaryan@xxxxxxxxx>
- To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
- Date: Mon, 03 Sep 2012 15:32:12 +0800
Hi all,
Engineers who are familiar with HyperLynx please help solve stackup
problem in HyperLynx. I'm getting stackup problems message when trying
to simulate a one single net in my PCB. My PCB board has 2 physically
layer only. But when trying to simulate a got warning message "The
stackup has error". And when I opened stackup to edit there is a another
message there. Nothing to do. No signal found for analyze". Before I had
not such kind problem.
Can anyone tell what does this means and how to solve it?
Thanks.
Mik.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
