Here is the Warnings and errors checked from Cadence Model Integrity 15.5.1. Generally, How can we check the ibis models which may contain different kinds of errors. Thanks. " WARNING - Model USB_HS_output: The [Falling Waveform] with [R_fixture]=45 Ohms and [V_fixture]=2.5V has TYP column DC endpoints of 1.24V and 1.69v, but an equivalent load applied to the model's I-V tables yields different voltages ( 1.24V and 1.66V), a difference of 0.41% and 6.45%, respectively. ERROR - Model USB_HS_output: The [Rising Waveform] with [R_fixture]=90 Ohms and [V_fixture_min]=0V has MIN column DC endpoints of 0.00V and 0.43v, but an equivalent load applied to the model's I-V tables yields different voltages ( 0.00V and 0.34V), a difference of 0.00% and 27.79%, respectively. " Best Regards, Harrison Xue from Shanghai, China --------------------------------- ÑÅ»¢Ãâ·ÑÓÊÏä-3.5GÈÝÁ¿£¬20M¸½¼þ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu