We are looking for ORCAD PCB Layout Designer. If there is anyone interested, contact me. PCB Layout Designer (Contractor, at Saratoga CA) Responsibilities: Work closely with design engineers to perform high speed system board (6-8 layer) PCB layout for telecommunication prducts, must be familiar with ORCAD Schematics Capture and PCB Layout Tools. The role focuses on complete development of PCB Layout from symbol creation, floor planning component placement, routing with timing ,signal integrity, and EMI constraints. And designs releases require generation of Gerber files, reports, and PCB related document for PCB fabrication. Requirements: 3+ years experience in Embedded Systems board, PCI Buses, Motorola PowerPC82xx,Ethernet and Telecommunication related area, PCB Layout Design. Detailed knowledge of circuit design and consideration for layout, placement, routing and timing constraints to meet Signal Integrity, EMI/RFI control and FCC, UL and European regulations. Expert at ORCAD layout and associated tools. Ren renjones@xxxxxxxxx ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu