----- Original Message ----- From: "Martin Euredjian" <martin@xxxxxxxxxxxxxx> To: <si-list@xxxxxxxxxxxxx> Sent: Wednesday, July 31, 2002 2:57 PM Subject: [SI-LIST] Layout service recommendations > > Being almost ready to go to layout I've been thinking about the issues of > sending a design out to a service bureau instead of doing it in-house. > Unless you work for a large corporation (I don't) you might not have access > to the $100K+ EDA tools and support infrastructure (budget, bodies, > equipment, etc.) you might need to produce good designs that work "out of > the box". > > My particular design is a small 5x7 in board that has a 1.5Gb/s front end > which gets deserialized and fed into FPGA's etc. Most internal frequencies > are in the 100 to 200 MHz range, with wide busses. > > Is it reasonable to assume that a good layout service can get this right the > first time? What should one look for? Are there any rules-of-thumb in > terms of cost? What guarantees should one demand? What should be the > hand-off process? What's the best way to assure success? > > Much like the list of recommended PCB houses, it might be nice to assemble a > list of high-speed-capable layout service houses. I'll volunteer to compile > and post to this list. > > Thank you, > > > =============================== > Martin Euredjian > eCinema Systems, Inc. > voice: 661-305-9320 > fax: 661-775-4876 > martin@xxxxxxxxxxxxxx > www.ecinemasys.com > =============================== > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu